1. Cleaning method for small white shoes 1. Deep cleaning Prepare a clean basin of clean water with a temperature of about 40℃, dip a brush with a small amount of water, then apply the detergent to the brush and then deeply clean the surface and mid...
1. Cleaning method for small white shoes
1. Deep cleaning
Prepare a clean basin of clean water with a temperature of about 40℃, dip a brush with a small amount of water, then apply the detergent to the brush and then deeply clean the surface and midsole of the sneaker. For small areas that need to be cleaned, use a soft brush to brush and then wipe it with a towel.
2. Clean the surface floating ash
Hold one sneaker in each of your left and right hands, and collide with each other a few times, and scatter the floating ash on the ground through collision. Then use a wet wipe or sponge to wipe the stains on the surface of the sneakers and the midsole.
3. Apply a protective layer to the white shoes. Now you can buy waterproof sprays for shoes on the market. As long as you spray them on the surface of the new shoes, a protective film will naturally be formed after the shade is dry. This can effectively isolate dirt or sewage into the surface of sneakers, making it easier and more convenient when cleaning.
4. Clean the shoelaces
Remove the shoelaces from the shoes, put them in a basin and soak them in a little detergent for an hour, and then put them in a cleaning bag with other small items that need to be cleaned for washing.
5. Store a few tissues on the inside of the shoes to prevent the sneakers from getting wet, and then carefully wrap the clean sneakers in a bag and place them in the shoe box. It is best to take photos of the sneakers when they are just bought and paste them on the shoe box, so that you can better store and find sneakers.
2. Maintenance methods for small white shoes
1. Cleverly use detergent
The edges of white shoes are easily yellowed because the chemical components in the washing powder are residues, that is, the enzymes in the washing powder. It will undergo chemical reactions in the sun to produce yellow substances, and the surface of the shoe turns yellow. Therefore, when cleaning white shoes, you can choose to use clean soap to clean them, so that residues are not easily left and whitening effects.
2. Cleverly wrap the washed white shoes with white tissues. You can wrap several layers of paper at the interface. On the one hand, it can block direct sunlight and damage the white shoes; on the other hand, it can use fluorescent agents to absorb ultraviolet rays to help the white shoes become white.
3. Cleverly use pure blue ink, the divalent iron ions in pure blue ink will react chemically with the stains in water. Therefore, when cleaning the white shoes, you can drop 3-5 drops of pure blue ink in the water to make the water light blue, then put the white shoes inside, soak them for about ten minutes, and finally rinse them with clean water. In addition, do not place the white shoes directly in the sun when drying, and they need to be dried in a cool, dry and ventilated place.
4. Use lead powder with skillful yellowing, if the white shoes are particularly severely yellowed, you might as well use the help of lead powder. You can brush the white shoes after they are cleaned, then wrap them in paper and dry them. I believe that your white shoes will shine again in the near future. (Note that lead is toxic, wear a mask during operation, and be careful to clean it after completion).
Notes:
1. The washing temperature cannot exceed
45 degrees. Most synthetic materials will change at high temperatures. Therefore, whether wearing or washing, the ambient temperature is best less than 45 degrees. This is why you should avoid hot water and exposure to the sun after washing.
2. Genuine leather/artificial leather needs special care. The upper made of genuine leather is not easy to maintain because it is easy to pleat and does not touch water. Therefore, it is safer to use wiping to clean it.
3. Clean the chemical agent
Otherwise, the shoes will turn yellow. The edges of white sneakers are prone to yellowing because of the chemical residue in the laundry detergent and the residue of a little rust in the water. You can attach tissue paper or toilet paper to the surface, but this is not the best method.
The shoes are yellow, so you can wash the shoes, then apply the white shoes powder on it, and then cover it with toilet paper and dry it. If you can't buy white shoe powder for a while, you can also use water alkali on the wall of the kettle to replace it. That is, we drain the alkali and grind it finely and apply it on the clean upper, so that the shoe can be as white as new.
4. What to do if the shoes are a little broken?
If the broken shoes are not very serious, you can first find shoe polish of the same color, dip a cotton swab in a small amount of raw egg white and mix the shoe polish and apply the broken shoes repeatedly and smooth it out. After drying, it can be repeated several times. Finally, I applied shoe polish to all the shoes and basically couldn't tell.
